Sony Ericsson TT4031 (SE-GM29) - Manual (Page 121)

Owner’s Manual Rev 1.0 Page 121 of 121
•_ OK
•_ ERROR
Allows the TE to specify a minimum acceptable profile which is checked by
the MS against the negotiated profile returned in the Activate PDP Context
Accept message.
The set command specifies a profile for the context identified by the (local)
context identification parameter, <cid>. Since this is the same parameter
that is used in the +CGDCONT command, the +CGQMIN command is
effectively an extension to the +CGDCONT command. The QoS profile
consists of a number of parameters, each of which may be set to a separate
value.
A special form of the set command, +CGQMIN=<cid> causes the minimum
acceptable profile for context number <cid> to become undefined. In this
case no check is made against the negotiated profile.
<cid> Description
Integer type Parameter which specifies a particular PDP context
definition
<precedence> Description
0 Subscribed (from network) value used
1 High priority
2 Normal priority
3 Low priority
<delay> Description
0 Subscribed (from network) value used
1-4 Delay class