Sony Ericsson TT4031 (SE-GM29) - Manual (Page 96)

Owner’s Manual Rev 1.0 Page 96 of 96
configured. There are several audio profiles available in non-volatile storage,
and the current profile can be modified by use of the AT*E2APR command.
The AT*E2EAMS command allows the user to:
configure the whole profile, specifying each audio parameter in a
comma separated list;
set a single parameter, given by its parameter number;
save the current profile to non-volatile memory under the current
profile number (see AT*E2APR).
The current audio settings can also be displayed by running the read
command AT*E2EAMS?
Default audio settings are given in AT*E2APR.
Abortability:
This command may not be aborted.
Refer to the diagram below to understand which parts of the audio circuit are
affected by the various parameters.
Figure 4.1 Audio diagram of the CODEC
<op> Description
0 Configure current profile (<pr1> to <pr21>)