Sony Ericsson TT4031 (SE-GM29) - Manual (Page 240)

Owner’s Manual Rev 1.0 Page 240 of 240
Test if the
command is
supported
AT*E2STKN=?
•_ *E2STKN: (list of supported
<sel_item>)
•_ +CME ERROR <err>
•_ OK
•_ ERROR
The application informs the ME about the selected menu item by means of
the AT*E2SKTN command. The ME answers with OK, or ERROR.
The Do command allows the external application to select the menu item in
the item list that was created by means of the SET-UP MENU command.
<sel_item> Description
Integer type The identifier is a single byte between 1 and 255. It
identifies the selected menu item corresponding to SET-
UP MENU command. Values follow the definition
described in GSM 11.14
15.9 AT*E2STKC M2M STK Set Up Call
Description Command Possible responses
Answer to the
reception of SET UP
CALL
AT*E2STKC=<answer
>
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Test if the command
is supported
AT*E2STKC=?
•_ *E2STKC: (list of supported
<answer>)
•_ +CME ERROR <err>
•_ OK
•_ ERROR
The ME passes the parameters within SET UP CALL command to the external
application by means of the unsolicited result code *E2STKC, so that it takes
up the decision on progressing or rejecting the call.
Answer command allows the external application to send the appropriate
answer after receiving the unsolicited result code, and before the timeout
expires.
If Answer command is sent once the timeout expires, an ERROR response is
generated.
Values follow GSM 11.14 standard.