11 at+cmgr read message – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 207
Owner’s Manual
Rev 1.0
Page 207 of 207
0
Store message to “BM” (or some manufacturer specific
memory). No CBM indications are routed to the TE
2
New CBMs are routed directly to the TE using unsolicited
result code:
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data
> (Text mode enabled)
<ds> Description
0
No SMS-STATUS-REPORTs are routed to the TE
1
SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code: : +CDS:
<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (Text
mode enabled). SMS-STATUS-REPORT is not stored in
ME/TA
2
SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code: +CDSI: < mem><index> (Text
mode enabled). SMS-STATUS-REPORT is stored in ME/TA
Unsolicited Result codes:
+CMT:<oa>, [<alpha>, <scts>
[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<CR><LF><data>
(Text Mode enabled). Refer to the show text mode command, +CSDH for
information on the parameters in italics.
+CMTI: <mem>,<index>
+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
+CDSI: <mem><index>
Example
Display cell broadcast messages:
AT+CNMI=3,0,2,0,0
13.11 AT+CMGR Read
Message
PDU Mode
Description Command Possible
Responses
Read message AT+CMGR=
<index>
•_ +CMGR: <stat>,[<alpha>],<length>]
<CR><LF><pdu>
•_ +CMS ERROR: <err>
•_ OK
•_ ERROR