27 at+csas save settings – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 92
Owner’s Manual
Rev 1.0
Page 92 of 92
When enabled, an incoming call is indicated to the TE with unsolicited result
code +CRING: <type> instead of the normal RING.
Test command returns values supported by the TA as a compound value.
<mode> Description
0
Disables extended format
1
Enables extended format
Unsolicited Result Codes:
+CRING: <type>
3.27 AT+CSAS Save Settings
Description Command
Possible
Responses
Save Settings
AT+CSAS[=<profile>] •_ +CMS ERROR: <err>
•_ OK
•_ ERROR
Get available
profiles
AT+CSAS=?
•_ +CSAS: (list of supported
<profile>s)
•_ +CMS ERROR: <err>
•_ OK
•_ ERROR
Saves active message service settings to a non-volatile memory. A TA can
contain several settings profiles. Settings specified in commands Service
Centre Address +CSCA, Set Message Parameters +CSMP and Select Cell
Broadcast Message Types +CSCB (if implemented) are saved. Certain
settings may not be supported by the storage (e.g. SIM SMS parameters)
and therefore can not be saved.
Test command shall display the supported profile numbers for reading and
writing of settings.
<profile> Description
0..255
Manufacturer specific profile number where settings are
to be stored. Default value is 0