Sony Ericsson TT4031 (SE-GM29) - Manual (Page 116)

Owner’s Manual Rev 1.0 Page 116 of 116
6.3 AT+CGDATA Enter Data State
Description Command Possible Responses
Establish GPRS/packet
domain connection
+CGDATA=[<L2p>,[cid[
,cid>[,…]]]]
•_ CONNECT
•_ ERROR
•_ OK
•_ ERROR
Test if the command is
supported
+CGDATA=?
•_ +CGDATA: (list of
supported <L2P>s)
•_ OK
•_ ERROR
Causes the MS to perform whatever actions are necessary to establish
communication between the TE and the network using one or more
GPRS/packet domain PDP types. This may include performing a GPRS/packet
domain attach and one or more PDP context activations.
<L2P> Description
PPP Point-to-point protocol for a PDP such as IP
6.4 AT+CGDCONT Define PDP Context
Description Command Possible Responses
Select PDP
context
parameters
+CGDCONT=[<cid>
[,<PDP_type> [,<APN>
[,<PDP_addr>
[,<d_comp>
[,<h_comp> [,<pd1>
[,…[,pdN]]]]]]]]]
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Read the
command
+CGDCONT? •_ +CGDCONT: <cid>,
<PDP_type>,<APN>,
<PDP_addr>,<d_comp>,
<h_comp>[,<pd1>[,…[,pdN]]
] [<CR><LF>+CGDCONT:
<cid>, <PDP_type>,<APN>,
<PDP_addr>,<d_comp>,
<h_comp>[,<pd1>[,…[,pdN]]
] [...]]
•_ OK
•_ ERROR