Sony Ericsson TT4031 (SE-GM29) - Manual (Page 268)

Owner’s Manual Rev 1.0 Page 268 of 268
Read command gives the default adjustment for all outgoing calls (given in
<n>), and also triggers an interrogation of the provision status of the CLIR
service (given in <m>).
Test command returns values supported by the TA as a compound value.
Note!_ On a per call base CLIR functionality is explained in
subclause “ITU-T V.25ter dial command”.
<n> Description
0 Presentation indicator is used according to the
subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
Note!_
<m> Description
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Note!_
16.16 AT+CSSN Supplementary Service Notification
Description Command Possible Responses
Presentation of
notification result codes
from TA to TE
AT+CSSN=[<n>[,<m>]
]
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Read the current setting AT+CSSN? •_ +CSSN: <n>,<m>
•_ +CME ERROR <err>
•_ OK
•_ ERROR