Sony Ericsson TT4031 (SE-GM29) - Manual (Page 153)

Owner’s Manual Rev 1.0 Page 153 of 153
string type Two byte cell ID in hexadecimal format
<ta> Description
0-63 According to GSM 04.18 V8.6.0, the coding of the timing
advance value is the binary representation of the timing
advance in bit periods; 1 bit period = 48/13 ìs. <ta> is
the integer representation of the timing advance in
binary format
64-255 Reserved
11.2 AT*E2EMM Ericsson M2M Engineering Monitoring
Mode
Description Command Possible Responses
Set the
response
presentation mode
AT*E2EMM=
<n>[,<m>]
•_ ERROR
•_ OK
Display mode
neighbour cells are
taken from the
toplist
*E2EMM:
Serving Cell
MCC,MNC,LAC,CellID,BSIC,Ch[,RxL,C1,
C2][,RxLFull,RxLSub,RxQFull,RxQSub,T
A,TN],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch
>
[,<rxl>,<c1>,<c2>][,<rxlFull>,<rxlSub
>, <rxqfull>,<rxqsub>,<ta>,<tn>],
NeighBours Cells
MCC,MNC,LAC,CellID,BSIC,Ch,RxL[,C1,
C2],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch
>,<rxl>[,<c1>,<c2>]
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch
>,<rxl>[,<c1>,<c2>]
…
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch
>,<rxl>[,<c1>,<c2>]
OK
Compact mode.
The first cell is the
serving cell, the
rest are neighbour
cells taken from
the toplist
*E2EMM: <mcc>,<mnc>,<ci>,
<bsic>,<ch>[,<rxl>][,<rxlSub>,<rxqs
ub>,
<ta>],<mcc>,<mnc>,<ci>,<bsic>,<ch
>, <rxl>,
<mcc>,<mnc>,<ci>,<bsic>,<ch>,<rxl
>,
…
<mcc>,<mnc>,<ci>,<bsic>,<ch>,<rxl
>