Tektronix CSA8000B User Manual
Page 139
Displaying Waveforms
CSA8000B & TDS8000B User Manual
3- 65
Overview
Related control elements and resources
To control a Mag view (cont.)
Set horizontal
display
parameters
3.
Use the Horizontal knobs (see right) to achieve a good
display of the waveform in the Mag time base.
Time base settings for Channel waveforms will be
adjusted as you use the controls; the controls will be
inoperable if you have a reference or a math waveform
selected.
Note that the Mag1 markers enclose a segment of Main
view that appears across the 10 division width of the
Mag view. See below.
Portion magnified in the Mag1 time base view
Main
Mag
Divider
bar
For more
information
4.
Press the Horizontal Menu front-panel button. Click
the
icon in the the upper-right corner of the Horiz
Setup dialog box, and then click any dialog-box
control to pop up help on that control.
5.
Click the Help button in the Horiz Setup dialog box to
access a context-sensitive overview on the horizontal
controls and their set up.
See Accessing Online Help on page 3--167 for an
overview of the online help system.
End of Procedure