Tektronix CSA8000B - Manual (Page 203)

Data Input and Output
CSA8000B & TDS8000B User Manual 3- 129
Figure 3- 25: Export dialog box
Use the process just described for exporting a waveform on page 3--128, select
the Histogram button in the Export dialog box (see Figure 3--25). Also skip
selecting a source. The instrument supports a single histogram, so the current
histogram is automatically selected. If no histogram is enabled in the Hist Setup
dialog box, the Histogram button will be disabled in the Export dialog box.
How you use the exported waveform or histogram depends on your application.
The following example is a simple application using a waveform; the procedure
is general and may require adapting for your spreadsheet or other data-analysis
tool.
Overview To use exported waveforms Control elements & resources
Prerequisites 1. MS Excel 97 running on a PC or on the instrument.
2. Access to a waveform exported by the instrument.
H See To Export Your Waveform on
page 3--128.
To Export Your Histogram
To Use an Exported
Waveform (or Histogram)