Tektronix CSA8000B - Manual (Page 30)

Installation
1- 12 CSA8000B & TDS8000B User Manual
Connect the Peripherals
The peripheral connections are mostly the same as those you would make on a
personal computer. The connection points are shown in Figure 1--3. See
Table 1--1 on page 1--13 for additional connection information.
WARNING. Before installing peripheral accessories to connectors (mouse, keyboard,
etc.), power down the instrument. See Powering Off the Instrument on page 1--15.
Removable hard drive.....................
Monitor.............
Printer......................
RS-232.................
Network.............................
PS2 mouse
1
.......................
PS2 keyboard
1
................
USB................................
CD drive.........................
GPIB...........
Monitor....................
Card slot
2
...........
Audio line out.......................
Audio line in........................
1
Product ships with a USB keyboard that plugs into the USB port and a USB mouse that plugs into the back of the keyboard
2
PCMCIA card readers are not available on the following products: CSA8000B SN B020338 and above, TDS8000B SN B020346 and above.
Product software version 2.0 (or greater) does not support PCMCIA readers.
Gated trigger...........
(only available with Option GT)
Figure 1- 3: Locations of peripheral connectors on rear panel