Tektronix CSA8000B - Manual (Page 190)

Data Input and Output
3- 116 CSA8000B & TDS8000B User Manual
Overview To save your setup Control elements & resources
Prerequisites 1. The instrument must have appropriate sampling
modules in place before powering on the instrument.
2. Instrument must be powered up.
3. Set up the instrument controls as you want them saved
as part of a recallable setup.
For help in making your setup, check the references at
right and other sections in this chapter specific to the
setup you wish to make.
H See Sampling Module User Manuals for
sampling module installation.
H See Power On Instrument on page 1--13.
H See page 3--24 for acquisition setup.
H See page 3--48 for trigger setup.
Display the
Save Setup dia-
log box
4. From the application menu bar, select File, and then
select Save Setup. See illustration at right.
The Save Setup dialog box allows for the entry of a file
name, file type, and includes a field for adding your
comments. See below.
Name a
destination
5. Use the Save in: drop-down list and buttons (see right)
to navigate to the directory in which to save your setup.
Tip. If you save the setup file in the MS Windows
Startup directory, the saved preferences will be loaded
with each MS Windows startup.