Tektronix CSA8000B User Manual
Page 84
Acquiring Waveforms
3- 10
CSA8000B & TDS8000B User Manual
Overview
Related control elements and resources
To set the signal input (cont.)
Set the
horizontal
acquisition
window
5.
Push the View Main button to make sure the main time
base view is selected. Use horizontal knobs to scale and
position the waveform on screen and to set sample
resolution.
Positioned horizontally
Scaled horizontally
The Resolution knob sets the record length. (See
discussion on page 3--19.)
Push Set to 50% if required to stabilize display.
Continue with
the acquisition
setup
6.
To finish the acquisition setup, you must set the
acquisition mode and start the acquisition.
See To Set Up Acquisition Controls on page 3--24.
For more help 7.
For more information on the controls described in this
procedure, push the Vertical or Horizontal MENU
button. Click the HELP button in the setup dialog box
that displays.
End of Procedure