Tektronix CSA8000B User Manual
Page 192
Data Input and Output
3- 118
CSA8000B & TDS8000B User Manual
Use the procedure that follows to recall a setup to the instrument. Remember that
recalling a setup replaces the existing setup, which is lost.
Overview
To recall your setup
Control elements & resources
Prerequisites 1.
The instrument should have appropriate sampling
modules in place for the setup to be recalled. You must
have access to a setup saved by the instrument.
H See Sampling Module User Manuals for
sampling module installation.
H See Power On Instrument on page 1--13.
H See Keys to Using on page 3--114.
Display the
Recall Setup
dialog box
2.
From the application menu bar, select File, and then
select Recall Setup. (See right.)
The Recall Setup dialog box allows navigation to
directories, lists setup files in the directory, and provides
for selection of a setup file. Comments for selected files
appear in the comment box. (See below.)
Name a
destination
3.
Use the Look in: drop down list and buttons (see right)
to navigate to the directory which contains a setup that
you want to recall.
To Recall Your Setup