Tektronix CSA8000B User Manual
Page 58
Incoming Inspection
1- 40
CSA8000B & TDS8000B User Manual
NOTE. A test button is not highlighted until you select it. As you select the button
for each test (tool tip appears when you point to the button), a highlight box
appears around the button. When you click Start, the button blinks until the test
is complete and the highlight box changes color to indicate the test is complete.
Follow any instructions appearing on the screen.
7.
Check test results in scrollable results listing in the Test Results window of
the QAPlus test window. All tests should pass.
8.
Close the QA+Win32 diagnostics by selecting Exit in the File menu or click
the Control Box (X) in upper right corner.
9.
You can restart the TDS/CSA8000 product software application by clicking
Start
, then selecting Restart from the Shutdown Windows dialog box.
End of Procedure