2 setting of base unit no, 2 setting of unit no, I/o allocation – Toshiba T2N User Manual
Page 204
Advertising
User's manual
191
4. I/O Allocation
As explained in Part 1 Section 1.5, when the expansion units, set the
Unit No. before operating. The setting is carried out by a rotary switch in
the upper part of the expansion connector on the left hand side of the rack.
(Example)
1. Switches will be set at o at the factory.
2. Be careful not to duplicate Unit Nos. on units.
3. Do not use setting 4-9, as these are not for use.
4.2
Setting of
Base Unit No.
BU228N
(Basic Unit)
BU268
(Expansion Unit #1)
BU268
(Expansion Unit #2)
BU266
(Expansion Unit #3)
Advertising