Toshiba T2N - Manual (Page 74)

4.Installation and Wiring
User’s manual 59
When installing the T2N,avoid the following locations.
(1) Where the ambient temperature exceeds the 0-55
°
C range.
(2) Where the relative humidity exceeds the 20-90% range.
(3) Where there is condensation due to sharp temperature variations.
(4) Locations subject to vibration in excess of the permissible value.
(5) Locations subject to shock in excess of the permissible value.
(6) Where there are corrosive gases or flammable gases.
(7) Where there is dust,salinity or iron particles.
(8) Locations exposed to direct sunlight.
When installing the panel which houses the T2N, take note of following items.
(1) Install as far away as possible from high-voltage panels and power
panels.(200mm or more)
(2) When there are high-frequency machines or equipment,securely ground
the housing panel.
(3) When using the same channel base as other panels,ensure there are no
leakage current from the other panels and equipment.
4.1
Operating Enviroment