Toshiba T2N - Manual (Page 28)

1.System Configuration
User’s Manual 13
1.4
The T2N supports enhanced communication functions. Either RS485 or
RS232C can be selected for this communication port by using selection
switches.
There are three communication functions in the T2N.
One of them can be selected by setting swithches CM0/CM1 (SW.4/SW.5).
Function Operation
Computer Link This performs to connect between a Host computer and
up to 32 T2Ns, using RS485.
(one to one ,using RS232C)
Data Link This performs to connect two T2E/T2Ns.
They share 32W data with each other.
Free ASCII This performs to connect between the external devices
such as inverter, etc. and the T2N.
For details of these functions and usage method, see T2E/T2N User’s manual
- Enhanced communication function -(UM-TS02E**-E003).
•
Switch settinf of communication port.
Setting Position
Dip-SW.1
Communication port interface.
OFF Conforms to RS485.
ON Conforms to RS232C.
Communication port
These swithes are set to RS485 at the factory.
NOTE