Toshiba T2N - Manual (Page 5)

Introduction
- iv -
Safety Precautions
Safety Precautions
Installation:
1. Excess temperature, humidity, vibration, shocks, or dusty and corrosive gas
environment can cause electrical shock, fire or malfunction. Install and use the T2N
and related equipment in the environment described in this manual.
2. Improper installation directions or insufficient installation can cause fire or the units to
drop. Install the T2N and related equipment in accordance with the instructions
described in this manual.
3. Turn off power before installing or removing any units, modules, racks or terminal
blocks. Failure to do so can cause electrical shock or damage to the T2N and related
equipment.
4. Entering wire scraps or other foreign debris into to the T2N and related equipment can
cause fire or malfunction. Pay attention to prevent entering them into the T2N and
related equipment during installation and wiring.
5. Turn off power immediately if the T2N or related equipment is emitting smoke or odor.
Operation under such situation can cause fire or electrical shock. Also unauthorized
repairing will cause fire or serious accidents. Do not attempt to repair. Contact Toshiba
for repairing.
6. The T2N must be installed in an enclosure. The user should consider to prevent
contact with careless touch to the live parts of this product in during operation or
maintenance.
7. The Protective ground terminal of the T2N must be connected to an external protective
earth.
8. The computer which is connected to the T2N must be connected to an external
protective earth properly.
9. The external cables, including for data transmission, which are prepared by the user
are outside of the scope of this document.
! CAUTION