Chapter 2 t utrial, 3 creating the composed loop 1 track – Yamaha SU700 User Manual
Page 106
Chapter 2 T
utrial
106
Chapter 2 Tutorial
2.4.3 Creating the COMPOSED LOOP 1 track
■ Sampling
We will sample track 75-1“Lo Note Rezo C2” from the included audio CD to the
COMPOSED LOOP 1 track (subsequently referred to as CL1).
●
The sampling procedure is the same as described on page 50 of the preceding sec-
tion, “Building Your Own Song.”
●
Set the sampling grade to “22K 8BIT MONO L.”
■ Modifying the sound
For the CL1 track, we will set the following four parameters.
[Settings]
SOUND group .......... [PITCH]
+042
FILTER group ........... [CUTOFF]
+110
[RESONANCE]
050
EFFECT group ......... [EFFECT 2] (1DELAY)
020
To set
PITCH
,
CUTOFF
, and
RESONANCE
, use the same procedure as you did when
making settings for
LOOP
tracks 1 and 2.
For the CL1 track, we will modify the parameters of
EFFECT 2
.
●
Adjusting the Effect Parameters
By default, effect block 2 applies the 1DELAY effect. We will leave this as the effect
setting, but we will adjust several of the effect’s parameters for the CL1 track.
Procedure
1.
Press the EFFECT SETUP/[SETUP 2] button.