Yamaha SU700 - Manual (Page 249)

Chapter 10 Jobs 249
CHAPTER
10
(Indicates that mute was applied at measure 4, beat 1,
clock count 279.)
(Indicates that mute was released at measure 4, beat 2,
clock count 107.)
(where the numbers indicate the event location).
If EVNT=MUTE
4. The screen now displays the location of the mute event nearest the current song lo-
cation. Two example displays are as follows.
5. Select the mute event you want to delete by pressing the sequencer’s or but-
ton as necessary. Each press on the button moves you to the next mute event
( MUTE or ON ); each press on moves you to the preceding mute event.
6. To delete the event, press the JOB/[DEFAULT] knob-function button. The information
for the displayed event disappears, and the screen jumps to the next mute event (if
any), or else the preceding mute event. Delete as many mute events as you wish. (If
you deleted all mute events, the screen displays
NO EVENTS ).
7. When you are finished making changes, press [OK] to register them or else press
[CANCEL] to cancel them. (If you press [CANCEL], all data will be returned to its
original state.)
▼ The SU700 returns you to the main screen.
If EVNT=LOOP RESTART, ROLL, or SCENE
The procedure is essentially the same as the mute-event deletion procedure described
above. The differences are as follows.
●
If LOOP RESTART: The event-selection screen looks like this.
●
If ROLL: The screen identifies both roll on and roll off events. But note these events
are always deleted in pairs. If you delete a Roll-On event, the SU700 automatically
deletes the subsequent Roll-Off as well; if you delete a Roll-Off, then the SU700
also deletes the preceding Roll-On.
●
If SCENE: The screen identifies the location and the scene, as in the following example.
Indicates the scene button. A to G for buttons [A] to [G], or T for the [TOP] scene button.