Yamaha SU700 - Manual (Page 343)

Effect Parameter List 343
APP
ENDIX
36: 1DELAY [1DELAY]
1 Feedback Level FBLEVEL -63,...,+63 Amount of feedback
2 Feedback Hi Damp FBHIDMP 1,...,10 High range attenuation (lower values cause
the high range to decay faster)
3 EQ Low Gain LOWGAIN -12,...,+12 Gain with which the EQ will boost/cut the
low range
4 EQ High Gain HI GAIN -12,...,+12 Gain with which the EQ will boost/cut the
high range
37: X-DELAY [CROSS DELAY]
1 Feedback Level FBLEVEL -63,...,+63 Amount of feedback
2 Feedback Hi Damp FBHIDMP 1,...,10 High range attenuation (lower values cause
the high range to decay faster)
3 Input Select INSELECT L, R, L/R Input select
4 EQ Low Gain LOWGAIN -12,...,+12 Gain with which the EQ will boost/cut the
low range
5 EQ High Gain HI GAIN -12,...,+12 Gain with which the EQ will boost/cut the
high range
38: DLY+PAN [DELAY+AUTO PAN]
1 Feedback Level FBLEVEL -63,...,+63 Amount of feedback
2 Feedback Hi Damp FBHIDMP 1,...,10 High range attenuation (lower values cause
the high range to decay faster)
3 Auto-Pan Depth INSELECT 0,...,127 Auto-panning depth
4 EQ Mid Gain LOWGAIN -12,...,+12 Gain with which the EQ will boost/cut the
mid range
5 EQ Mid Freq. HI GAIN 4,...,40 Frequency at which the EQ will boost/cut
the mid range
39: HALL [HALL]
1 Reverb Time REVTIME 0,...,69 Reverb length
2 LPF Cutoff Freq. LPF FRQ 34,...,60 Frequency at which the low pass filter will
cut the high range
3 HPF Cutoff Freq. HPF FRQ 0,...,52 Frequency at which the high pass filter will
cut the low range
4 Er/Rev Balance ER/REV Level balance of the early reflections and
the reverberation
5 Diffusion DUFFUSN 0,...,10 Spread of the reverb
63>R,...,E_R,
...,E<R63