Yamaha SU700 - Manual (Page 326)

A
ppendix
326 Specifications
Specifications
1. Sequencer
Memory Approx. 32,000 notes (no backup)
Tempo (BPM) 40.0 to 299.9 (Accurate to 1 decimal place)
Recording Method Realtime
Synchronization Internal, MIDI sync, MTC slave
Tracks 42 tracks (10 sample tracks/bank
×
4 banks; plus
one AUDIO IN track and one MASTER track)
Songs Holds up to 20 songs.
2. Tone Generator Section
Tone generation method AWM2
Maximum polyphony 64
Data formats 16-bit linear, 8-bit linear
Signal processing Stereo sampling supported.
A/D 18-bit
D/A 18-bit
Sampling frequencies If analog input: 44.1, 22.05, or 11.025 kHz
(Results can be monitored at any frequency prior
to recording.)
If digital or optical input: 48.0 or 32.0 kHz
Sampling wave memory: 4MB RAM (standard)
Sampling time (with
standard 4MB RAM)
At 44.1 kHz, stereo, 16-bit res.: 22.3 sec.
At 22.05 kHz, mono, 16-bit res.: 89.3 sec.
At 11.025 kHz, mono, 8-bit res.: 357.2 sec.
Effect types 43
Multi-effector Can apply up to three effects at once.
Can be applied directly to analog input.
3. Data Storage
Internal drive Floppy drive (accepts 2HD [1.44MB] and 2DD
[720KB] disks)
4. User Interface
Display Custom 4-color flourescent (FL) display
16-alphanumeric display area; segment display
area; custom display area
Pads 12 pads (8 pads are touch [velocity] sensitive)
Knobs 12 rotary-encoder knobs (non-click type)
Ribbon controller 1