Yamaha SU700 - Manual (Page 112)

Chapter 2 T
utorial
112 Chapter 2 Tutorial
Begin recording using the same procedure as for the CL1 track, and at the first beat
of the first measure (MEASURE display 001:1), press and hold the CL3 pad. Continue
holding it for three beats, and release it immediately before 001:4.
2.4.6 Creating the COMPOSED LOOP 4 track
■ Sampling
We will sample track 45-13: “*Radiator” from the included audio CD to the COM-
POSED LOOP 4 track (subsequently referred to as CL3).
●
The sampling procedure is the same as described on page ?? of the preceding sec-
tion, “Building Your Own Song.”
●
Set the sampling grade to “22K 8BIT MONO L.”
■ Modifying the sound
For the CL4 track, we will set the following parameters.
[Settings]
SOUND group .......... [PAN] R20
[PITCH] -035
[ATTACK] 077
[RELEASE] 070
LFO group ................ [SPEED] 021
[FILTER] 020
FILTER group ........... [FILTER TYPE] BPF
[CUTOFF] 082
[RESONANCE] 122
EFFECT group ......... [EFFECT 1] 010
[EFFECT 2] 042
[EFFECT 3] 070
Make these settings using the same procedure as you did for the LOOP 1 and 2
tracks.
■ Loop length setting
Using the same procedure as you did for LOOP 2, set the sample loop length of the
CL4 track to “LOOP LENGTH=032.”