Yamaha SU700 - Manual (Page 29)

CHAPTER
1
Chapter 1 SU700 Components, Connections, and Startup 29
1.3 Connecting Up
The SU700 is extremely easy to set up. Simply connect the appropriate components
as described below.
Power
Connect the power as follows.
1. Confirm that the power switch (on the rear panel) is in the OFF position (pro-
truding from the panel). If the switch is ON, press it so that it pops out into the
OFF position.
2. Connect the small end of the supplied power cable to the power inlet on the rear
panel.
3. Connect the other end to a standard wall outlet.
CAUTION
Do not connect the power while the power switch is ON.
Input Source
If you are going to record a sample or supply an audio input signal to accompany
realtime playback, you need to connect an input source. You can connect up one or
more of the following.
●
Connect a microphone to the one of the ANALOG INPUT jacks on the rear panel.
●
Connect analog line input (for example, from a CD player or electronic instrument)
to the ANALOG INPUT jacks on the rear panel. To input a stereo signal, connect to
both jacks.
●
(If you have installed the optional AIEB1 board:) Connect a digital or optical line
to the DIGITAL IN or OPTICAL IN connector on the rear panel.