Chapter 10 j obs – Yamaha SU700 User Manual

Page 262

Advertising
background image

Chapter 10 J

obs

262

Chapter 10 Jobs

SAMPLE | PROCESS

Use to: Perform various types of processing on sample waveforms.

These jobs can only be used on nonempty sample tracks. You cannot select the AU-
DIO IN or MASTER track (since these tracks never contain samples).

Four of these jobs can be used to reduce the size of the selected sample in memory,
thereby freeing up additional space for new sample recording. Specifically, the fol-
lowing jobs can be used for this purpose:

TRIM, FREQ. CONVERT, BIT CONVERT

,

and

STEREO TO MONO

.

The following jobs are available.

TRIM

Deletes the “unused” parts at the beginning and end of
the waveform (the part before the start point and the
part after the end point).

REVERSE

Reverses the waveform (so that the sound runs back-
wards).

NORMALIZE

Proportional adjustment of waveform amplitude (for
better dynamic range).

FREQ. CONVERT

Reduces the sampling frequency.

BIT CONVERT

Reduces the bit resolution.

STEREO TO MONO

Changes stereo sample (two waveforms) to monaural
sample (one waveform).

<TRIM>
This job erases the extraneous parts or the waveform: specifically, the part of the
waveform existing prior to the current start-point setting, and the part of the wave-
form that follows the current end-point setting. You can use this job to increase the
amount of memory available for new sample recording.

Following execution, the start-point and end-point settings will coincide with the
actual start and end of the waveform. In particular, the start-point value will become
00000000.

Start point

(=00000000)

End point

(=03330000)

Start point

(=00004567)

End point

(=03334567)

TRIM

Advertising