Yamaha SU700 - Manual (Page 209)

Chapter 8 Knob Functions 209
CHAPTER
8
If both gain settings are negative:
Low Band High Band
HI GAIN [EQ HI GAIN]
Range: -64 to +63
Default: +00
Works on: Sample tracks and MASTER track
Sets the gain applied at the equalizer’s high band. Positive values apply a positive
gain, thereby emphasizing the sound within the high band. Negative values apply a
negative gain, suppressing the sound within the high band. The default setting,
+00 ,
applies no positive or negative emphasis.
HI FREQ [EQ HI FRQ]
Range: 500 to 16K (in 31 steps)
Default: 10K
Works on: Sample tracks and MASTER track
Sets the central frequency for the high band. The minimum possible setting is 500Hz;
the maximum is 16kHz, and the default is 10kHz.
LO GAIN [EQ LO GAIN]
Range: -64 to +63
Default: +00
Works on: Sample tracks and MASTER track
Sets the gain applied at the equalizer’s low band. Positive values apply a positive gain,
thereby emphasizing the sound within the low band. Negative values apply a negative
gain, suppressing the sound within the low band. The default value,
+00 , applies no
positive or negative emphasis.
LO FREQ [EQ LO FRQ]
Range: 32 to 2.0K (in 37 steps)
Default: 80
Works on: Sample tracks and MASTER track
Sets the central frequency for the low band. The minimum possible setting is 32Hz;
the maximum is 2.0kHz, and the default is 80Hz.
Level
Freq
Level
Freq
Sample Sample
Central frequency Central frequency