Yamaha SU700 - Manual (Page 108)

Chapter 2 T
utrial
108 Chapter 2 Tutorial
CL1 sample
6. Turn the knob for track CL1 to make the display read “1DELAY=020.”
7. Now let’s set the delay interval of 1DELAY to match the BPM of the song.
Press the [NOTE] button to that “RESOLUTION=” is blinking. Then turn the dial to
select a note value of .
■ Loop length setting
Using the same procedure as you did for LOOP 2, set the sample loop length of the
CL1 track to “LOOP LENGTH=016.”
■ Recording to the sequencer
Now we will record the sample for the CL1 track on the sequencer.
Samples for COMPOSED LOOP tracks will playback in a loop for the specified length
(number of measures).
The sample for the CL1 track will be looped over 16 quarter-note beats (four mea-
sures), and will sound for five beats from the beginning of measure 3. (See diagram
below.)
The recording procedure is the same as described on page 63 of “Building Your Own
Song.”