Yamaha SU700 - Manual (Page 338)

A
ppendix
338 Effect Parameter List
15: OVERDRV [OVERDRIVE]
1 Drive DRIVE 0,...,127 Degree of distortion
2 LPF Cutoff LPF FRQ 34,...,60 Frequency at which the filter will cut the
high range
3 EQ Mid Freq. MIDFREQ 14,...,54 Frequency at which the EQ will boost/cut
the mid range
4 Output Level OUT LVL 0,...,127 Output level
5 Dry/Wet Balance DRY WET Balance between the dry sound and the ef-
fect sound
16: AMPSIM [AMP SIMULATOR]
1 Drive DRIVE 0,...,127 Degree of distortion
2 Amp Type AMPTYPE Select the type of amp to be simulated
3 LPF Cutoff Freq LPF FRQ 34,...,60 Frequency at which the low pass filter will
cut the high range
4 Edge EDGE 0,...,127 Curve of distortion characteristics (sharp
(127): distortion begins suddenly;
mild (0): distortion begins gradually)
5 Output Level OUT LVL 0,...,127 Output level
17: COMP [COMPRESSOR]
1 Threshold THRSHLD -48,...,-6 Input level at which compression begins to
be applied
2 Attack ATTACK 1,...,40 Time until when the compressor begins to
take effect
3 Release RELEASE 10,...,680 Time until the compressor effect disappears
4 Ratio RATIO 1.0,...,20.0 Compression ratio of the compressor
5 Output Level OUT LVL 0,...,127 Output level
18: COMP+DS [COMP+DIST]
1 Threshold THRSHLD -48,...,-6 (Compressor) Input level at which compres-
sion begins to be applied
2 Ratio RATIO 1.0,...,20.0 (Compression) Compression ratio of the
compressor
3 Drive DRIVE 0,...,127 Degree of distortion
4 LPF Cutoff LPF FRQ 34,...,60 Frequency at which the low pass filter will
cut the high range
5 Output Level OUT LVL 0,...,127 Output level
OFF, STACK,
COMBO, TUBE
D63>W,...,D_W,
...,D<W63