Yamaha SU700 - Manual (Page 146)

Chapter 4 SU700 Oper
ating M
odes
146 Chapter 4 SU700 Operating Modes
4.3 Other Modes
The SU700 offers two special modes that you use for work that is not directly related
to the sequencer. You can access these modes from the sequencer’s PLAY STANDBY
mode.
JOB MODE
DESCRIPTION
Use this mode to carry out one or more of the SU700 jobs. For details, see Chapter
10, “Jobs.” (
→
p.223)
WHAT YOU CAN DO IN THIS MODE
●
Carry out any of the SU700 jobs.
Once you are in this mode you can move from job to job. Note that you select the
job by pressing the job group selector first (along the top of the job grid) and then
the job button (along the left side of the grid).
To move from one job to another job in the same group, all you need to do is press
the appropriate job button.
To move from a job in one group to a job in another group, you must press both
the job group button and the job button.
HOW YOU GET TO THIS MODE
●
Press any job-group selector (along the top of the job grid) while the sequencer is
in PLAY STANDBY. You must then press a job selector (along the left of the grid) to
select the specific job (or job type).
HOW YOU EXIT THIS MODE
●
You leave the mode by completing or aborting the current job (by pressing [OK] or
[CANCEL] at the bottom-level or top-level job screen.) The SU700 automatically
returns you to PLAY STANDBY mode, with the song location set to the top of the
song (001:1).