Yamaha SU700 - Manual (Page 342)

A
ppendix
342 Effect Parameter List
31: NOISDLY [NOISY MOD DELAY]
1 Mod Speed MOD SPD 0,...,127 Delay modulation frequency
2 Mod Depth MODDPTH 0,...,127 Modulation depth
3 Mod Wave Type MODWAVE A,...,D Modulation type
4 Feedback Level FBLEVEL -63,...,+63 Feedback amount
5 Dry/Wet Balance DRY/WET Balance between the dry sound and the ef-
fect sound
32: NOISAMB [NOISE AMBIENT]
1 Mod Speed MOD SPD 1,...,127 Modulation speed
2 Mod Depth MODDPTH 0,...,127 Modulation depth
3 Delay Level DLY LVL A,...,D Delay level
4 AM Depth AMDEPTH 0,...,127 Depth of amplitude modulation
5 Dry/Wet Balance DRY/WET Balance between dry sound and effect
sound
33: FLOWPAN [FLOW PAN]
1 Auto-Pan Speed PAN SPD 0,...,127 Autopan frequency
2 Delay Dry/Wet DLY MIX 0,...,127 Balance between delay sound and effect
sound
3 Feedback Level FBLEVEL -63,...,+63 Feedback amount
4 Feedback Hi Damp FBHIDMP 1,...,10 Adjust the high range attenuation (lower
values will cause the high range to decay
faster)
5 Pre Delay Pan Depth PRPANDP 0,...,127 Depth of the pre-delay autopan
34: 3DELAY [DELAY L, C, R ]
1 Delay Time L TIME L 0,...,127 Length of left channel delay
2 Delay Time R TIME R 0,...,127 Length of right channel delay
3 Delay Time C TIME C 0,...,127 Length of center channel delay
4 Feedback Time FB TIME 0,...,127 Length of feedback delay
5 Feedback Level FBLEVEL -63,...,+63 Feedback amount
35 2DELAY [DELAY L, R]
1 Feedback Level FBLEVEL -63,...,+63 Amount of feedback
2 Feedback Hi Damp FBHIDMP 1,...,10 High range attenuation (lower values cause
the high range to decay faster)
3 EQ Low Gain LOWGAIN -12,...,+12 Gain with which the EQ will boost/cut the
low range
4 EQ High Gain HI GAIN -12,...,+12 Gain with which the EQ will boost/cut the
high range
D63>W,...,D_W,
...,D<W63
D63>W,...,D_W,
...,D<W63