Yamaha SU700 - Manual (Page 292)

Chapter 10 J
obs
292 Chapter 10 Jobs
If you wish to edit the name, press or to move the cursor to each charac-
ter position at which you want to delete, insert, or change a character. (The charac-
ter at that position flashes to indicate that it is selected.) To delete the selected char-
acter, press NAME/[DELETE] (on the Editing Function panel). To insert a space char-
acter, press NAME/[INSERT]. To change the character, turn the dial.
●
To ensure compatibility with MS-DOS standards, the SU700 will remove any empty
space characters from the name before saving the file to disk. The SU700 will auto-
matically append an “.AIF” file extension to the filename.
6. Press [OK] to execute the export.
▼ If there are no problems (see below), the SU700 displays
SAVING... and exports the
sample. When export is completed, the job terminates and the main screen reap-
pears.
●
If the disk becomes full during the export, the SU700 will display DISK FULL and
abort the operation.
▼ In the event of an invalid disk or a name duplication, processing is as follows.
●
If a file with the same name already exists on disk, the SU700 will display the
OVERWRITE ? warning message before carrying out the save. Press [OK] to pro-
ceed (overwriting the existing file), or press [CANCEL] to move back one step, so
that you can change the name.
●
If the disk in the drive is unformatted (or has a non-MS-DOS format): the FORMAT
NOW? message appears. If you wish to format the disk, press [OK]. (Keep in mind
that this will destroy any data already on the disk.) The SU700 will detect whether
the disk is 2HD-type or 2DD-type and will format it accordingly. When formatting
is completed, the SU700 will automatically proceed to export the sample.
●
If a disk is present but is write-protected, the WRITE PROTECTED message ap-
pears. Remove the disk, release the write-protect tab (or change to a different, un-
protected disk), insert the disk, and then press [OK] and proceed again from the top
of step 6. (Or else you can cancel the operation by pressing either [CANCEL] or
[OK].)