Yamaha SU700 - Manual (Page 169)

Chapter 6 Using the Features 169
CHAPTER
6
:1 :2 :3 :4 :1 :2 :3 :4
Description: Hold down [ROLL] button and press pad to record or play a “roll”
sound.
Operation in Each Mode:
REC mode
Holding down the [ROLL] button and pressing the pad records a
roll onto the track at the current resolution (see below). Note that if
you are working on a LOOP or COMPOSED LOOP track, the roll
event is not recorded as part of the loop—it is recorded as a se-
quence event that temporarily overrides the sound of the loop.
PLAY mode
Holding down the [ROLL] button and pressing the pad generates
playback of a roll, at the current resolution. Any sample play cur-
rently recorded on that track is automatically silenced while the roll
is in progress.
REC STANDBY or PLAY STANDBY mode
Not effective.
Additional Information:
●
The RESOLUTION setting selects the roll rate. When you press the
[ROLL] button, the current roll resolution appears in the NOTE
area of the screen. To change the resolution, proceed as follows.
(You can change this setting regardless of the sequencer mode.)
1 Press the [NOTE] button on the screen, so that the NOTE dis-
play area is flashing.
If sample looks like this:
At fast RESOLUTION
(Roll at )
At slower RESOLUTION
(Roll at )
Roll might look like this:
Recorded sample =