Yamaha SU700 - Manual (Page 242)

Chapter 10 J
obs
242 Chapter 10 Jobs
Procedure
Be sure that you have selected the appropriate song.
1. Press TRACK EDIT | TRACK COPY to enter this job.
▼ The screen displays SOURCE TRACK, and the bank number and meter bracket in-
dicate the last track you were working on (the last pad you pressed, except that if
this was AUDIO IN or MASTER then the fourth FREE track of the current bank).
2. Press a bank selector and track pad (as necessary) to select a nonempty source track.
▼ The bank number and meter bracket move to indicate the track selection. (A double
line must appear at the center of the bracket, indicating that the track contains a
sample.)
Indicates that the selected track contains a sample.
3. Press [OK].
▼ The screen displays DEST. TRACK.
NOTE:
If you selected an empty track at step 2 above, then the screen displays NO SAMPLE in-
stead. Go back to Step 2 and select a nonempty track, or else press [CANCEL] as neces-
sary to escape.
4. Press a bank selector and track pad (as necessary) to select the destination track.
▼ The bank number and meter bracket move to indicate the track selection.
5. Press [OK].
▼ If the destination track already contains a sample, the screen displays the OVER-
WRITE? prompt. If you do not wish to overwrite, press [CANCEL] as necessary to
move back to a previous job level or to return to the main screen. If you agree to
overwrite, press [OK] to execute the copy.
▼ The SU700 displays a “processing” pattern to indicate that it is copying the data.
When copying is completed, the main screen returns.