Yamaha SU700 - Manual (Page 79)

Chapter 2 Tutorial 79
CHAPTER
2
End of Intro A (End of top scene)
Start of Intro B
(Recall of Scene A)
4. Press to stop the sequencer. Then press to return to the top of the song. Fi-
nally, press to listen to the result. As playback proceeds, you should see and hear
the mute settings and the FREE-track setup (the samples that are played by the FREE
1–4 track pads) change as you move from one section to another.
NOTE:
• Even if the song returns automatically to the top position when you finish recording,
you must nevertheless press the button (or the [TOP] button, briefly) to restore the
top scene.
• If you are not happy with the results, you can use the UNDO/REDO feature to re-
move them. This feature works only while the sequencer is in PLAY STANDBY mode,
and only on the events recorded during the last recording pass. (
→
p.183)
• You can also delete selected scene-recall events using the EVENT EDIT |
LOCATION&VALUE job (
→
p.246).
▼ After starting playback, you should notice that the mute-setup changes as follows as
the song location changes from 008:4 (end of Intro A) to 009:1 (start of Intro␣ B).