Yamaha SU700 - Manual (Page 204)

Chapter 8 K
nob F
unctions
204 Chapter 8 Knob Functions
TIMING [GRV TIMING]
Range: -100 to +100 [%] (if LOOP); +000 to +100[%] (if COMPOSED LOOP or
FREE)
Default: +000
Works on: Sample tracks
This function applies an adjustment to the start location of the notes that fall within
the groove intervals. Turning the knob to the right increases the timing adjustment,
while turning to the left reduces it. Positive values delay the note start.
On LOOP tracks:
This function works only if BPM TRACKING is set to SLICE . If the setting is SLICE ,
the function shifts the start timing of every other phrase slice. Note that slicing will
generate a gap at one end of the interval.
If you wish, you can use the SOUND/LENGTH function to adjust the length. Increas-
ing the length will fill in the gaps (and increase the overlap), while reducing the
length will expand the gaps (while reducing the overlap).
If you allow overlapped playback (by setting ASSIGN=MULTI in the TRACK SET |
NOTE ASSIGN) job, then overlapping slices will produce a double sound.
On COMPOSED LOOP and FREE tracks:
The function adjusts the Note On position of the notes within the groove intervals.
RESOLUTION=
GRV TIMING = +000
GRV TIMING = +050
Start time is shifted.
Gaps
START POINT END POINT