Yamaha DSP5D - Manual (Page 273)

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
273
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
E TO MATRIX (only for MIX channels and
STEREO A/B channels)
This area shows the on/off status of the signal sent
from the MIX channel or STEREO A/B channel to the
MATRIX buses, and the point from which the signal is
sent.
F TO STEREO (MIX channels only)
This area shows the pan, the send position, and the on/
off status of the signal sent from the MIX channel to
the STEREO bus.
This screen shows the on/off status, level, and cue monitor
status of the output channels and DCA groups.
A ON/OFF (On/off)
Here you can switch output channels on/off, and
switch DCA group muting on/off. These settings are
linked with the [ON] keys of the corresponding chan-
nels and the [MUTE] keys of the DCA groups.
B Level
Here you can adjust the level of the output channels
and DCA groups. The current value is shown in the
box immediately below. These are linked with the
encoder or fader of the corresponding channel or DCA
group.
C Cue
Here you can switch cue monitoring on/off for output
channels and DCA groups. These are linked with the
[CUE] key of the corresponding channel or DCA
group.
6 5
FADER VIEW screen
FADER VIEW
1
3
2