Yamaha DSP5D - Manual (Page 310)

PAN/ROUTING function
310
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
H STEREO LINK
This specifies whether sound image movement will be
linked between the two channels shown in the screen.
To link the movement of the two channels, use the /
buttons at left and right to select one of the eight link
patterns. (For details on how each pattern will operate,
refer to p.146)
I SURROUND MODE
This indicates the currently selected surround mode.
J Level meters
These meters show the master levels of the surround
buses.
K MIX SEND ASSIGNMENT
If MIX SEND is selected as the operation of the MIX
section, this area indicates the surround parameters
that can be operated by the MIX [ON] key and MIX
encoder of the corresponding surround bus.
This screen shows the surround settings for each input
channel. From this screen you can also jump to the SURR
PARAM screen for the desired channel.
A Surround pan grid
For each input channel, the approximate surround pan
position is shown by the O symbol. If you click this
area, the SURR PARAM screen for that channel will
appear.
B Surround pan position
This indicates the surround pan coordinate positions
in the left/right direction (L/R) and the front/rear
direction (F/R).
C Channel
This is the number and name of the input channel.
8 9 J
K
SURR VIEW (Surround view) screen
SURR VIEW
1
2
3