GE Industrial Solutions AF-300 MICRO-$AVER II - Manual (Page 11)

2-3
(2) Controlling Method for Keypad Panel
When the power supply is activated, the keypad panel display will be as shown
in the figure on the right (60.00 FLASHING).
If the key is pressed, the Drive will start and accelerate up to 60 Hz
according to the factory setting. Use the key to stop operation.
WARNING - RUN and STOP keys function only in Keypad operation mode. (Function Code F_02 setting is 0)
STOP
RUN
1. Unit Cover (Middle)
2. Unit Cover (Top)
3. Keypad Panel (Optional)
4. Heat Sink and Mounting Tabs
5. Mounting Screw Holes
6. Top Cover Screw
Figure 2-3. TYPICAL DRIVE COMPONENTS
Drive Components
NOTE: NEMA 1 unit does not include keypad. Keypad is sold separately.
Keypad type is 6KM$2KP1 for NEMA 1 unit.
4
6
2
3
5
1