GE Industrial Solutions AF-300 MICRO-$AVER II - Manual (Page 33)

5-5
PROGRAM mode while stopped (example: changing the Torque Boost 1data)
➂
Not effective Not effective
Not operational
Exit PROGRAM mode
to keypad display**
FUNC
DATA
FUNC
DATA FUNC
DATA
FUNC
DATA
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
➛
Data is Stored*
Data is Stored*
→
➛
Data is Stored*
➛
*NOTE: After changing function data with keys, the key must be pressed. If this is not
done, the data will not be stored. If the key is pressed before key is pressed, the
changed data will be canceled and operation will continue with the previous data.
* * NOTE: Keypad displays Frequency, Amps, Voltage, etc. based on selection.
Not operational
Exit PROGRAM mode
to keypad display**
RUN RUN
STOP
STOP
PRG
Reset PRG
Reset
PRG
Reset
FUNC
DATA
FUNC
DATA