GE Industrial Solutions AF-300 MICRO-$AVER II User Manual
Page 87
10-5
EC Declaration of Conformity
Product identification
Product:
Inverter
Brand:
GE Fuji Electric
Model/type:
6KM$221F25N1A1 to 6KM$221003N1A1
6KM$221F25X4A1 to 6KM$221003X4A1
6KM$243F50N1A1 to 6KM$243005N1A1
6KM$243F50X4A1 to 6KM$243005X4A1
to which this Declaration relates is in conformity with the EMC requirements of the following standards.
Immunity:
EN50082-2 “Generic immunity standard Part 2 (industrial environment)”
Emission:
EN50081-1 “Generic emission standard Part 1 (Residential, commercial and light industrial)”
and conforms to the protection requirements of Council Directive:
89/336/EEC
relating to Electromagnetic Compatibility
When: Wired and earthed in accordance with the installation instructions.
Installed in a steel enclosure.
Used in conjunction with power input filter and ferrite rings which are recommended by
GE Fuji Electric.
Product identification
Product::
Inverter
Brand:
GE Fuji Electric
Model/Type:
6KM$221F25N1A1 to 6KM$221003N1A1
6KM$221F25X4A1 to 6KM$221003X4A1
6KM$243F50N1A1 to 6KM$243005N1A1
6KM$243F50X4A1 to 6KM$243005X4A1
to which this Declaration relates is in conformity with the Low Voltage requirements of the following
standard(s):
DIN VDEO160/1988
Category : Overvoltage category II/Pollution degree 2
and conforms to the protection requirements of Council Directive:
73/23/EEC
relating to low voltage
When: Wired and earthed in accordance with the installation instructions.
Installed in a steel enclosure satisfied ‘Pollution degree 2’.
Used in conjunction with 3AC power supply (Line) which has an earthed neutral-point for 3 phase
Input Drive and used in conjunction with 1AC power supply (Line) whose one line is earthed for
1-phase Input Drive.