GE Industrial Solutions AF-300 MICRO-$AVER II - Manual (Page 31)

5-3
➀
STOP Mode (Display continually flashes)
Not effective Not effective
To PROGRAM
mode while stopped To PROGRAM
mode while stopped To PROGRAM
mode while stopped
Keypad panel
operation:
Drive will run
Display = Hz
Terminal operation:
Not operational.
Keypad panel
operation:
Drive will run
Display = A
Terminal operation:
Not operational.
Keypad panel
operation:
Drive will run
Display = V
Terminal operation:
Not operational.
Keypad panel
operation:
Drive will run
Display = r/min
Terminal operation:
Not operational.
Keypad panel
operation:
Drive will run
Display = m/min
Terminal operation:
Not operational.
RUN RUN RUN RUN RUN
➛ ➛
➛ ➛ ➛ ➛
➛ ➛ ➛ ➛
➛ ➛
➛ ➛ ➛ ➛
STOP STOP
Not effective Not effective Not effective ➛ ➛ ➛ ➛
➛
➛ ➛
➛
➛
➛
➛
➛
➛
Display and Key Operation
1. Operations and displays in each mode
The keypad panel modes can generally be classified into five types. The operation method and the display
contents of each mode are shown below.
NOTE: Following examples are with maximum frequency, F_03 set higher than 60 Hz
To PROGRAM
mode while stopped To PROGRAM
mode while stopped
Hz display A display V display r/min display m/min display
FUNC
DATA FUNC
DATA FUNC
DATA FUNC
DATA
STOP STOP STOP
PRG
Reset PRG
Reset PRG
Reset PRG
Reset PRG
Reset