Safety precautions – GE Industrial Solutions AF-300 MICRO-$AVER II User Manual
Page 5
1-1
The following format is used on the equipment or found
in this manual. Read all labels and follow the directions
whenever working on the equipment.
DANGER, WARNING, CAUTION
AND NOTE PARAGRAPHS WITHIN
THIS INSTRUCTION MANUAL
The above paragraphs list some general safety
reminders and safety recommendations to be followed
when operating or installing this equipment. These
safety precautions will be repeated throughout this
instruction book where applicable.
Denotes operating procedures and
practices that, if not strictly observed, may result in
damage to, or destruction of the equipment.
Denotes operating procedures and
practices that may result in personal injury or loss of
life if not correctly followed.
DANGER, WARNING, CAUTION AND NOTES
NOTE:
Notes call attention to information that is
especially significant in understanding and operating
the equipment.
Section 1
SAFETY PRECAUTIONS
Due to CSA requirements, pertinent warnings are also provided in French and set off by ( )
WARNS ABOUT HAZARDS THAT
WILL RESULT IN IMMEDIATE SERIOUS PERSONAL
INJURY OR DEATH IF IGNORED.