GE Industrial Solutions AF-300 MICRO-$AVER II - Manual (Page 34)

5-6
➃
PROGRAM mode while running (example: changing the Torque Boost 1data)
*NOTE: After changing function data with keys, the key must be pressed. If this is not done,
the data will not be stored. If the key is pressed before key is pressed, the changed data
will be canceled and operation will continue with the previous data.
* * NOTE: Keypad displays Frequency, Amps, Voltage, etc. based on selection.
See Table 6 for Functions that can be changed while in RUN mode.
PRG
Reset
FUNC
DATA
FUNC
DATA