Cee-map (configuration), Configuration) – Brocade Network OS Command Reference v4.1.0 User Manual
Page 100
62
Network OS Command Reference
53-1003115-01
cee-map (configuration)
2
cee-map (configuration)
Enters the CEE map configuration mode.
Synopsis
cee-map default
Operands
None
Defaults
The only map name allowed is “default.”
Command Modes
Global configuration mode
Description
Use this command to enter the CEE map configuration mode.
Usage Guidelines
Only a single CEE map is allowed, named “default.” It is created when system starts up. The initial
configuration of the default CEE map is:
Precedence 1
Priority Group Table
1:
Weight 40, PFC Enabled, BW% 40
2:
Weight 60, PFC Disabled, BW% 60
15.0: PFC Disabled
15.1: PFC Disabled
15.2: PFC Disabled
15.3: PFC Disabled
15.4: PFC Disabled
15.5: PFC Disabled
15.6: PFC Disabled
15.7: PFC Disabled
Priority Table
CoS:
0
1
2
3
4
5
6
7
---------------------------------------------
PGID:
2
2
2
1
2
2
2
2
Enabled on the following interfaces
Examples
None
See Also