Brocade Network OS Command Reference v4.1.0 User Manual
Page 1201
Network OS Command Reference
1163
53-1003115-01
show slots
2
DISABLED
The module is powered on but disabled.
FAULTY
The module is faulty because an error was detected.
UNKNOWN
The module is inserted but its state cannot be determined.
Usage Guidelines
None
Examples
To display the modules present in a Brocade VDX 8770-4 chassis:
switch# show slots
Slot
Type
Description
ID
Status
----------------------------------------------------------------------
M1
MM
Management Module
112
ENABLED
M2
VACANT
S1
VACANT#
S2
SFM
Switch Fabric Module
113
ENABLED#
S3
VACANT
L1
LC48X10G
48-port 10GE card
114
ENABLED
L2
LC48X10G
48-port 10GE card
114
ENABLED
L3
VACANT
L4
LC48X1G
48-port 1GE card
131
ENABLED
# = At least one enabled SFM in these slots is required.
NOTE
An “@” following an SFM status line indicates that the status of the optical switch is “OPEN.”
See Also