Brocade Network OS Command Reference v4.1.0 - Manual (Page 401)

Network OS Command Reference 363
53-1003115-01
ip igmp snooping mrouter
2
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Enter no ip igmp snooping mrouter to remove the configured mrouter.
This command is mutually exclusive of ip igmp snooping querier enable.
Examples To configure a VLAN port member to be a multicast router interface.
switch(config)# interface vlan 100
switch(config-Vlan-100)# ip igmp snooping mrouter interface
tengigabitethernet 101/0/1
See Also interface, ip igmp snooping enable (global version), show ip igmp snooping,
ip igmp snooping enable, ip igmp snooping fast-leave, ip igmp snooping mrouter-timeout,
ip igmp snooping querier enable