Neighbor soft-reconfiguration inbound (bgp) – Brocade Network OS Command Reference v4.1.0 User Manual
Page 551
Network OS Command Reference
513
53-1003115-01
neighbor soft-reconfiguration inbound (BGP)
2
neighbor soft-reconfiguration inbound (BGP)
Stores all the route updates received from a neighbor.
Synopsis
neighbor {ip-address | peer-group-name} soft-reconfiguration inbound
no neighbor {ip-address | peer-group-name} soft-reconfiguration inbound
Operands
ip-address
IPv4 address of the neighbor
peer-group-name
Peer group name configured by the neighbor peer-group-name command.
Defaults
None
Command Modes
BGP configuration mode
Description
Soft reconfiguration stores all the route updates received from a neighbor. If you request a soft
reset of inbound routes, the software compares the policies against the stored route updates,
instead of requesting the neighbor’s BGP4 route table or resetting the session with the neighbor.
Usage Guidelines
Use the no form of the command to disable this feature.
Examples
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# neighbor 10.11.12.13 soft-configuration inbound
See Also
None