Brocade Network OS Command Reference v4.1.0 - Manual (Page 1059)

Network OS Command Reference 1021
53-1003115-01
show running-config interface fortygigabitethernet fcoeport
2
show running-config interface fortygigabitethernet fcoeport
Displays whether a 40-gigabit Ethernet interface is configured as an FCoE port.
Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] fcoeport
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to determine whether a 40-gigabit Ethernet port is configured for FCoE.
Usage Guidelines None
Examples None
See Also fcoe, fcoeport