System-description – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1332
Advertising
1294
Network OS Command Reference
53-1003115-01
system-description
2
system-description
Sets the global system description specific to LLDP.
Synopsis
system-description line
no system-description
Operands
line
Specifies a description for the LLDP system. The string must be between 1
and 50 ASCII characters in length.
Defaults
None
Command Modes
Protocol LLDP configuration mode
Description
Use this command to set the global system description specific to LLDP.
Usage Guidelines
Enter no system-description to clear the global LLDP system description.
Examples
To set the global system description specific to LLDP:
switch(conf-lldp)# system-description Brocade
See Also
Advertising